| Customization: | Available |
|---|---|
| Type: | Coating Production Line |
| Certification: | CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Booth Dimension | ||
| - Internal Size(L×B×H) | 18000×5000×5000mm& 59'X16'4''X16'4'' | |
| - External Size(L×B×H) | 18144×6896×5600mm& 59'5''X22'6''X18'4'' | |
| Foundation and Floor | ||
| - Grid | 2 rows air exhust plenum chamber | |
| - Metal Basement | Need to build the base construction , 2 rows of pits in the ground for exhaust air, dimension of each pit is 16100×760mm(L×W), with galvanized grids made by twisted steel and flat bar above |
|
| Wall and Door | ||
| - Steel Wall | Profiled bar beams in the roof to strengthen the room body Double construction with insulations EPS , thickness 75mm, width:950mm, tongue and groove interlock structure |
|
| - Roof Panel | Single profiling galvanization plate | |
| - 4-Folded Entrance Door With Safety Glass Window |
1 Unit, 4000×4500mm(WxH) galvanized steel cover frame, with polystyrene(EPS) inside | |
| - Operator's Door With Safety Glass Window |
2Units, 650×2000 mm(W×H) | |
| Lighting System | ||
| - Ceiling Lights | 24Units, each 4×36 W, with electronic ballasts | |
| - Side Lights | 28Units, each 2×36W, with electronic ballasts | |
| Filter System | ||
| - Filter | Pre-filter, ceiling filter, exhaust fiberglass filter, activated carbon filter. | |
| - Filtering area | 75M2 | |
| Ventilation System | ||
| - Intake air system (Fresh Air) |
6×5.5KW double-intake centrifugal fans for intake air, model YDW4.5S, total air capacity: 93000m3/h |
|
| - Exhaust air system(Exhaust Air) |
3×11KW double-intake centrifugal fans for exhaust air, with motor outside, belt-drive, model TAE-630H, total air capacity: 84000m3/h | |
| - Damper actuates | Pneumatic damper actuates from spraying to baking cycle, manual dampers for exhaust air |
|
| Heating System | ||
| - Heating Exchange | Stainless Steel | |
| - Heating Exchange Capacity |
260000Kcal/h | |
| - Max. Drying Temperature |
80 °C | |
| - Heating time | 10-15 min (from 20 to 60) by Drying Phase | |
| - Heating Type (optional) | RIELLO RG5S (260000 kcal/h)Diesel )3set | |
| Control Box | ||
| - Control system | Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, ampere meter, voltmeter, hour meter, temperature limit controller, pressure gauge, exhaust reduction voltage motor start |
|
| - Total power | 75.5KW | |
){kind=link}