| Customization: | Available |
|---|---|
| Type: | Coating Production Line |
| Certification: | CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Booth Dimension | |||
| - Internal Size(L×B×H) | 9200x4500x3500mm | ||
| - External Size(L×B×H) | 9344x6396x4100mm | ||
| Foundation and Floor | |||
| - Grid | 2 rows air exhust plenum chamber | ||
| - Metal Basement | Need to build the base construction , 2 rows of pits in the ground for exhaust air, with galvanized grids made by twisted steel and flat bar above | ||
| Wall and Door | |||
| - Steel Wall | Double construction with insulationsEPS , thickness 75mm, 0.5mm steel thickness ; width:950mm, tongue and groove interlock structure, with Polystyrene(EPS) insulation inside |
||
| - 3-Folded Entrance Door With Safety Glass Window |
1 Unit, 3500×3400 mm(WxH) , galvanized steel cover frame, with polystyrene(EPS) insulation inside |
||
| - Operator's Door With Safety Glass Window |
1Unit, 650×2000 mm(W×H) | ||
| Lighting System | |||
| - Ceiling Lights | 12Units, each 4×36 W, with electronic ballasts. | ||
| - Side Lights | 12Units, each 2×30W, with electronic ballasts. | ||
| - Brightness | >1000LUX | ||
| Filter System | |||
| - Filter | 31M2 | ||
| Ventilation System | |||
| - Intake air system (Fresh Air) |
2x5.5KW double-intake centrifugal fans for intake air, model is YDW4.5M, total air capacity is 30000m3/h |
||
| - Exhaust air system(Exhaust Air) |
1x7.5KW double-intake centrifugal fans for exhaust air, external motor, belt-drive, model TAE-710H, air capacity is 20000m3/h | ||
| - Damper actuates | Manual damper actuates from spraying to baking cycle, manual damper for exhaust air | ||
| Heating System | |||
| - Heating Exchange | Stainless Steel | ||
| - Heating Exchange Capacity |
260000Kcal/h | ||
| - Max. Drying Temperature |
80 °C | ||
| - Heating time | 10-15 min (from 20 to 60) by Drying Phase | ||
| - Heating Type (optional) | RIELLO RG5S (260000 kcal/h)Diesel )1set | ||
| Control Box | |||
| - Control system | Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, ampere meter, voltmeter, hour meter, temperature limit controller, pressure gauge, exhaust reduction voltage motor start |
||
| - Total power | 22KW | ||
){kind=link}